How to Make Resin Earrings using Oytra's Resin Art Kit?

Get ready to unlock your creativity and craft stunning, personalized resin earrings! With vibrant pigments, charming dried flowers, and glitter, resin earrings are both unique and fashionable. 

This step-by-step guide will walk you through the simple yet fun resin art process.

Step 1: Start with the Magical Potion –Resin and Hardener Mixing.

This is the most crucial step for successful resin art! Your OYTRA Epoxy Art Resin has a 2:1 formulation, meaning for every 2 parts of resin (Part A), you add 1 part of hardener (Part B).

Use a measuring cup or a weighing scale and be as accurate as possible. For example, mix 60 g of resin with 30 g of hardener. Similarly, for 100 g of resin, use 50 g of hardener.

Once measured, use the paper cups use a wooden stick to mix gently yet consistently for 3-4 minutes. Make sure to scrape the sides and bottom of the cup to ensure everything is fully combined.

Step 2: Decorations and pouring. 

Check out Oytra's Resin Earring Kit with Accessories {glitter flakes and dried flowers }

For embedding the pressed flowers, pour a thin layer of resin and place the flowers into it. Let this layer cure slightly, for 5-7 hours-the flowers get firmly stuck on the mould. This will ensure that the flowers don't float around. Then, pour more layers of resin as much as required to fill the mould to its brim.

Glitter flakes can be used in two ways for an even sparkle or a concentrated effect. The more effective method is to mix them directly into the resin by stirring well, and then pour it into the mould. Otherwise, sprinkle 5-6 pinches on top of the poured resin and gently push them down with a stick. 

Step 3: Wait for the Beauty to Come to Life!

Lightly cover the mould so that dust and other unwanted particles do not settle on it.

Leave it aside for between 24-36 hours at room temperature. Avoid disturbing it during this crucial curing period.

Step 4: Demould to Reveal Your Finished Resin Earrings!

Once fully cured and no longer sticky, gently remove your beautiful artwork from the silicone mould. And just like that, your custom resin piece is ready to shine!

Explore other beginner-friendly kits by Oytra: personalized keychains for gifting, tea coasters, pendants, and clocks. 

With OYTRA ART RESIN KITS, you'll have plenty of room to get your hands dirty and truly embrace the inevitable messy starts and mistakes that are bound to happen.

For a similar step-by-step guide for each of these kits, visit the Art Resin blog section on Oytra's official website.